Skip to content

Thermal Convectors

Thermal Convectors

Free cooling systems and units are specially designed to minimize energy costs in oil cooling applications.

Contact the company for pricing, availability and delivery terms.

Product description

Free cooling systems and units are specially designed to minimize energy costs in oil cooling applications. Thanks to the fully closed process loop, the cooling temperature is always clean, reliable and stable. It is extremely well suited to hydraulic oil cooling.

Fan and U Control System
The German-made U Control system is used as standard in all units. Thanks to this control system, the fans are automatically controlled by a stepped frequency drive according to the water temperature. In addition, German-made high-efficiency Ziehl-Abegg fans are used as standard in all units.

Automatic Drain System
Thanks to the Automatic Drain System, when the thermoconvector is not operating in the winter months, the water inside the unit is drained by the vacuum of a pump and by compressed air. The inclined installation of the unit also helps this drainage. In this way, the copper pipes are prevented from being punctured in the months when the air temperature is low. The pump that creates the vacuum during draining is used in the summer months for the water spraying required by the AFS system.

PLC Control System (Touch Screen)
In the PLC control system, the status of the fans and pumps is visible on the main screen. Through this system, values are entered, and the inlet – outlet water values and the control of the fans depending on them are provided. The electronic valves on the inlet – outlet manifold are controlled by this PLC system. The set values for automatic draining are entered on this screen. Thus, when the water or air temperature reaches the set value and the unit is not running, it closes the electronic valves and reverses the pump that works for the AFS, switching to vacuum operation, thereby draining the water inside the unit automatically. The PLC control system can display all warnings, past operations and faults. A troubleshooting function is also available by connecting over the internet via an Ethernet connection and a computer.

Adiabatic System
When the air temperature rises very high in the summer months, water is sprayed as a mist, using a 40 bar pressure pump and special metal nozzles, onto the side where the fans draw in air, in order to lower the cooling water to a certain level. The water droplets set in motion by this misting reach the cellulosic filter on the panels and, by preventing the water from reaching the panels, prevent clogging caused by scale and dust. In this way, the service life of the unit is much longer. In addition, the water supplied as a mist forms an adiabatic air layer on the upper surface of the filter. In this way, in summer, water much closer to the wet-bulb temperature of the air can be obtained. This spraying system works completely automatically. Depending on need, via the PLC or a separate control panel, it automatically activates or deactivates the spraying system according to the air temperature.

Frequently asked questions

How can I get a quote for this machine?
You can use the form on our contact page, or reach us by phone or WhatsApp. Describing the part you want to produce, the raw material you will use, your mold dimensions and your target production quantity speeds up the quoting process. Prices and delivery terms are determined by the machine and configuration; you should confirm this information directly with the company.
What information is needed for a quote?
The part's dimensions, weight and raw material; the mold dimensions (tie-bar spacing, mold thickness, number of cavities); the target production quantity and cycle time; your robot or auxiliary equipment plan; the facility's electrical and cooling water infrastructure. You can get in touch even if some information is missing; we will complete the gaps together.
What is the difference between a servo-hydraulic and an electric injection molding machine?
In servo-hydraulic machines, the hydraulic pump is driven by a servo motor; they offer a wide tonnage range and flexible use. In all-electric machines, the movements are performed by servo motors; they stand out in precise, clean and repeatable production. Which one is suitable depends on the part, tonnage and budget; for a detailed comparison, see the technology guide in the news section.
Where can I find brochures and technical documents?
The series pages contain links to the brochures and technical documents published by Haitian. If the document for the model you are interested in is not on the page, you can request it through our contact channels.
What information should I share in a technical service request?
The machine's brand and model, serial number, the error code or message on the screen, the stage and time at which the problem appeared, and the most recent work performed make it easier for us to assess your service request. Do not force a machine that is showing fault symptoms as a test.
How do I confirm that a spare part is suitable for my machine?
Share the machine's model and serial number, the label or code of the old part and clear photos of the part; if necessary, add the dimensions and electrical values as well. Availability and price information vary by part; confirm this information with the company after your request.
Which industries is this machine suitable for?
Haitian series are presented for applications in industries such as packaging, medical, automotive, electronics, home appliances, consumer goods and logistics. The industry information on the page and our industry pages give you an idea; the series suitable for your part and mold is determined through a technical discussion.
How can I get in touch to see or discuss the machine?
To have the machine and your application assessed, first contact us through our contact channels; let us clarify your request and a suitable meeting time together. Visit or inspection conditions are confirmed during the discussion.

Let's choose the model that suits your production together

Share the part you will produce, your mold and your production goals; let us review machine selection, technical service and spare parts together with our team in Konya. Contact us for pricing, availability and delivery terms.

Request a quote

Your request for information and a quote for Thermal Convectors.

Other products in the same group

All products