Skip to content

Haitian Mars 5 Series Servo-Hydraulic Injection Molding Machine

Haitian Mars 5 series servo-hydraulic plastic injection molding machine 1 / 8
  • Haitian Mars 5 series servo-hydraulic plastic injection molding machine
  • Haitian Mars 5 injection molding machine, studio view
  • Injection molding machines of different tonnages from the Haitian Mars 5 series
  • Haitian Mars 5 servo-hydraulic injection molding machine, side view
  • Haitian Mars 5 injection unit: hopper and plasticizing barrel
  • Haitian Mars 5 injection molding machine, three-quarter view
  • Mars 5 servo motor and hydraulic pump group
  • Mars 5 clamping unit, transparent internal structure view

Product code: MA5

The fifth generation of Haitian's best-selling servo-hydraulic series: Mars 5 delivers energy-saving, intelligent and open-integration production across a 600 – 33,000 kN clamping force range. A single series for a wide spectrum including automotive, home appliances, consumer goods, electronics and logistics.

  • BrandHaitian
  • Series familyServo-Hydraulic Solutions (Mars)
Clamping force
600 – 33,000 kN
Generation
5th generation
Drive / technology
Hydraulic drive with servo motor, electric plasticizing unit
Control
12.1-inch TFT LCD and 15.6-inch touchscreen

Contact the company for pricing, availability and delivery terms.

Features that make this series stand out

For model and tonnage selection, technical service and spare parts, our team in Konya is by your side according to your production.

  • A wide choice of models in the 600 – 33,000 kN clamping force range.
  • Fifth-generation servo motor made specifically for the series and a high-response servo power system.
  • Electric plasticizing (dosing) unit: increases plasticizing speed and quality while raising the energy efficiency of the whole machine; Haitian states a higher energy-saving rate in the range of 20 – 40% with this solution.
  • HT Clamp a self-learning and self-correcting algorithm that adjusts the mold opening position quickly and precisely.
  • HT Lubricate neural-network-based intelligent lubrication; the amount of oil is dynamically adjusted to production conditions.
  • Fully closed-loop injection control and double-layer linear guide support.
  • Weldless energy pipelines and an energy-saving insulation device.
  • 12.1-inch TFT LCD screen and 15.6-inch touch screen; Go Factory 2.0 digital intelligent management software.
Haitian Mars 5 Series Servo-Hydraulic Injection Molding Machine Request a Quote Search

Product description

Haitian Mars 5 is the fifth generation of Haitian's most preferred servo-hydraulic injection system. Haitian states that the Mars family has reached more than 410,000 sales. The fifth generation has been re-engineered on top of this well-established foundation: improvements have been made in every section, from the injection and plasticizing unit to the mold clamping structure, and from the hydraulic circuit to the control system. The result is more stable injection movements, high repeatability and lower energy consumption.

What kinds of production is it suitable for?

Mars 5 is a general-purpose series. Haitian's application examples highlight automotive parts, home appliances and other device components, consumer electronics products and logistics products. Thanks to the wide tonnage range, different workloads, from small technical parts to large-volume containers and crates, can be planned within the same series.

With Konht Makine

Konht Makine provides plastic injection molding machine sales, technical service and spare parts services from Konya. You can contact us to evaluate together which Mars 5 model suits your part and mold.

Featured technologies

  • Energy-saving insulation device

    Energy-saving insulation device

    The double-layer barrel cover and removable insulation structure enhance the heating and insulation effect; heat loss is reduced and heating up is more efficient.

  • Weld-free energy pipelines

    Weld-free energy pipelines

    Weld-free connections in the piping reduce the risk of oil leakage, improve line cleanliness and extend the service life of the hydraulic components.

  • Fifth-generation servo power system

    Fifth-generation servo power system

    A servo motor made specifically for injection molding machines delivers quiet and stable operation with high response speed and dynamic precision.

  • Large-screen control system

    Large-screen control system

    The 12.1-inch TFT LCD screen and 15.6-inch touchscreen, with a renewed interface, give the operator simpler and faster operation.

  • Standard T-slot platens

    Standard T-slot platens

    All platens come with T-slots as standard; mounting molds and automation fixtures becomes easier.

  • Electric plasticizing

    Electric plasticizing

    The new electric dosing system increases plasticizing speed and quality and raises the machine's overall energy efficiency.

  • Raised plasticizing unit

    Raised plasticizing unit

    The plasticizing parts have been comprehensively renewed; Haitian states that wear resistance has doubled and service life has been extended.

Application areas

Examples of parts produced by this series and the industries where it is used.

Technical specifications

Brand
Haitian
Series family
Servo-Hydraulic Solutions (Mars)
Generation
5th generation
Drive / technology
Hydraulic drive with servo motor, electric plasticizing unit
Clamping force
600 – 33,000 kN
Control
12.1-inch TFT LCD and 15.6-inch touchscreen
Digital management
Go Factory 2.0 smart management software, open integration
Application areas
Automotive, home appliances, consumer goods, electronics, logistics
Technical document
Available (2 technical documents and 2 product brochures, English PDF)

Videos

Haitian MA5/Ultra: a new performance standard in injection technology

A video presenting the new performance standard that the Haitian MA5/Ultra series offers in injection…

96 parts per cycle: a new standard in high-volume production with Haitian Mars V

A video describing a high-volume application producing 96 parts per cycle with the Haitian Mars V.

Documents and brochures

Frequently asked questions

How can I get a quote for this machine?
You can use the form on our contact page, or reach us by phone or WhatsApp. Describing the part you want to produce, the raw material you will use, your mold dimensions and your target production quantity speeds up the quoting process. Prices and delivery terms are determined by the machine and configuration; you should confirm this information directly with the company.
What information is needed for a quote?
The part's dimensions, weight and raw material; the mold dimensions (tie-bar spacing, mold thickness, number of cavities); the target production quantity and cycle time; your robot or auxiliary equipment plan; the facility's electrical and cooling water infrastructure. You can get in touch even if some information is missing; we will complete the gaps together.
What is the difference between a servo-hydraulic and an electric injection molding machine?
In servo-hydraulic machines, the hydraulic pump is driven by a servo motor; they offer a wide tonnage range and flexible use. In all-electric machines, the movements are performed by servo motors; they stand out in precise, clean and repeatable production. Which one is suitable depends on the part, tonnage and budget; for a detailed comparison, see the technology guide in the news section.
Where can I find brochures and technical documents?
The series pages contain links to the brochures and technical documents published by Haitian. If the document for the model you are interested in is not on the page, you can request it through our contact channels.
What information should I share in a technical service request?
The machine's brand and model, serial number, the error code or message on the screen, the stage and time at which the problem appeared, and the most recent work performed make it easier for us to assess your service request. Do not force a machine that is showing fault symptoms as a test.
How do I confirm that a spare part is suitable for my machine?
Share the machine's model and serial number, the label or code of the old part and clear photos of the part; if necessary, add the dimensions and electrical values as well. Availability and price information vary by part; confirm this information with the company after your request.
Which industries is this machine suitable for?
Haitian series are presented for applications in industries such as packaging, medical, automotive, electronics, home appliances, consumer goods and logistics. The industry information on the page and our industry pages give you an idea; the series suitable for your part and mold is determined through a technical discussion.
How can I get in touch to see or discuss the machine?
To have the machine and your application assessed, first contact us through our contact channels; let us clarify your request and a suitable meeting time together. Visit or inspection conditions are confirmed during the discussion.

Let's choose the model that suits your production together

Share the part you will produce, your mold and your production goals; let us review machine selection, technical service and spare parts together with our team in Konya. Contact us for pricing, availability and delivery terms.

Request a quote

Your request for information and a quote for Haitian Mars 5 Series Servo-Hydraulic Injection Molding Machine.

Other products in the same group

All products