Skip to content

Technical Service

Learn what information is required when submitting a technical service request for your plastic injection molding machines and what to look out for in preventive maintenance; get in touch with Konht Makine.

When a machine stops on the production line, every minute costs money. Konht Makine provides technical service support for Haitian plastic injection molding machines in Konya. Preparing the information below, so that we can assess your request quickly and accurately, noticeably shortens the first conversation.

Information you should share in a service request

  • Machine brand, model and serial number: The serial number is usually found on the nameplate on the machine.
  • Error code or screen message: A photo of the message on the control screen is often the most valuable piece of information.
  • Symptom and timing of the problem: At which stage does the fault occur: mold closing, injection, plasticizing or mold opening?
  • Recent work performed: Whether there has been a mold change, maintenance, a part replacement or a setting change.
  • Production conditions: The raw material, mold and cycle time used.
  • Machine location and a contact person: Required for service planning.

For safety reasons, we recommend that you do not force a machine that shows signs of a fault just to test it, and that, if you are unsure, you cut the power and contact us.

When should you contact us?

  • If the machine displays an error code or stops unexpectedly
  • If you notice unusual noise, vibration, overheating, or oil or water leaks
  • If the cycle time is getting longer or the part weight and dimensions fluctuate
  • If you would like to create a periodic maintenance plan or review your existing one

Service process

  1. Your request is received and a preliminary assessment is made with the information above.
  2. If necessary, a preliminary diagnosis is made by phone or photo to narrow down the possible causes.
  3. The required parts and the scope of the intervention are determined and the service visit is planned.
  4. The work carried out after the intervention and our recommendations are communicated to you.

General recommendations for preventive maintenance

The items below are general guidance; the manufacturer's manual should always be taken as the basis for the machine's maintenance intervals.

  • Regularly check the hydraulic oil level, temperature and filter condition.
  • Keep the cooling water circuit and the oil cooler clean.
  • Lubricate the lubrication points at the intervals given in the manual.
  • Check the heater bands, thermocouple connections and cable condition.
  • Periodically test the safety gate, emergency stop and mold protection functions.
  • Monitor wear of the screw, barrel and non-return valve; fluctuation in part weight can be the first sign.
  • Notice leaks in hoses, fittings and seals early.

For a detailed list, see our article Periodic maintenance checklist for injection molding machines.

Submit a service request

You can send your service request through the channels on the contact page. If a situation requires spare parts, you can also use the checklist on our Spare Parts page to verify the part.